Redmi Note 12 Pro 5G is equipped with a MediaTek Dimensity 1080 processor, making this smartphone one of the best Redmi Note series devices. Users express their satisfaction with the performance and camera capabilities of this device. However, the operating system of a smartphone is also very important for users. Redmi Note 12 Pro 5G was launched with MIUI 14 based on Android 12, and now it will start receiving Android 13 update in EEA and India. * Firmware Detail: Region: China Branch: Stable Type: Fastboot OS: 13 Size: 6.7 GB URL: Download * MIUI 14 changelog: Highlights MIUI takes up less storage space now and keeps being swift and responsive over much more extended periods. Improved system architecture comprehensively boosts the performance of both pre-installed and third-party apps while saving power. Attention to detail redefines personalization and brings it to a new level. More than 30 scenes now support end-to-end privacy with no data stored in the cloud and all actions
TWRP Recovery is now available for the T-Mobile Galaxy Note 5, and you can even use this safely to even root your device. Note that this is available only for the T-Mobile variant, model no. SM-N920T, and not any other Note 5 set.
TWRP is available in its latest version 2.8.7.1. TWRP recovery would let you install custom ROMs on your Galaxy Note 5, and it’s the best backup solution either.
Backup done through TWRP creates a complete copy of the device, which can be used to restore the device later to bring it back to exact state at the time of backup. It’s useful in unbricking the device too.
View my Flipboard Magazine.
÷ Prerequisites:
•T-MOBILE GALAXY NOTE 5, model no. SM-N920T
•Don’t try this on other Note 5 variants at Sprint, AT&T, Verizon, US Cellular, etc. or Canadian or international Note 5, or any Note 5 whose model no. is not N920T.
•Don’t try on any other device whatsoever.
*Disclaimer:
Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
How To Install:
Download Links:
•TWRP recovery for T-Mobile Galaxy Note 5 (SM-G920T only) — Link | File: TWRP-2.8.7.1-Alpha_N920T.tar.md5 (25.5 MB)
•Odin PC software — Link | File: Odin3_v3.10.6.zip (1.6 MB)
Step 1. Download Odin and TWRP recovery file from above.
Step 2. Install Galaxy Note 5 driver first of all. Double click the .exe file of drivers to begin installation. (Not required if you have already done this.)
Step 3. Extract the Odin file. You should get this file, Odin3 v3.10.6.exe (other files could be hidden, hence not visible).
Step 4. Disconnect your Galaxy Note 5 from PC if it is connected.
Step 5. Enable OEM unlock on your device.
•Go to Settings > About device. And then tap on build no. 7 times or until your get the message ‘You’re now a developer’.
•Go back to Settings, scroll down, and tap on ‘Developer options’.
•Look for ‘Enable OEM unlock’ and use its toggle to enable it. Accept the warning by tapping on OK button.
Step 6. Boot Galaxy Note 5 into download mode:
•Power off your Galaxy Note 5. Wait 6-7 seconds after screen goes off.
•Press and hold the three buttons •Power + Home + Volume down together until you see warning screen.
•Press Volume Up to continue to download mode.
Step 7. Double click on extract file of Odin, Odin3 v3.10.6.exe, to open the Odin window, as shown below. Be careful with Odin, and do just as said to prevent problems.
Step 8. Connect your Galaxy Note 5 to PC now using USB cable. Odin should recognize your Galaxy Note 5. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue. Look at the pic below.
•You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.
•If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with the device. Mostly, drivers are the problem (look at step 2 above).
•You can try different USB ports on your PC too, btw.
Step 9. Load the TWRP file into Odin. For this, click the AP button on Odin and the select the file: TWRP-2.8.7.1-Alpha_N920T.tar.md5.
Step 10. Make sure Re-partition checkbox is NOT selected, under the Options tab. Don’t use PIT tab either. Go back to Log tab btw, it will show the progress when you hit start button in next step.
p 11. Click the Start button on Odin now to start flashing the firmware on your Galaxy Note 5. Wait till installation is finished, after which your Galaxy Note 5 will reboot automatically. You’ll getPASS message as show below upon successful installation from Odin.
•If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the firmware and flash it again as said above.
•If you get FAIL in the top left box, then also you need to flash the firmware again as stated …
That’s it. Enjoy the TWRP recovery v2.8.7.1 on your Galaxy Note 5.
PLZ Use the comment box below to contribute more ideas & Suggestions .
Don’t Forget To Share This post With Your Friends & your Social World.
Best regards.
÷ Prerequisites:
•T-MOBILE GALAXY NOTE 5, model no. SM-N920T
•Don’t try this on other Note 5 variants at Sprint, AT&T, Verizon, US Cellular, etc. or Canadian or international Note 5, or any Note 5 whose model no. is not N920T.
•Don’t try on any other device whatsoever.
*Disclaimer:
Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
How To Install:
Download Links:
•TWRP recovery for T-Mobile Galaxy Note 5 (SM-G920T only) — Link | File: TWRP-2.8.7.1-Alpha_N920T.tar.md5 (25.5 MB)
•Odin PC software — Link | File: Odin3_v3.10.6.zip (1.6 MB)
Step 1. Download Odin and TWRP recovery file from above.
Step 2. Install Galaxy Note 5 driver first of all. Double click the .exe file of drivers to begin installation. (Not required if you have already done this.)
Step 3. Extract the Odin file. You should get this file, Odin3 v3.10.6.exe (other files could be hidden, hence not visible).
Step 4. Disconnect your Galaxy Note 5 from PC if it is connected.
Step 5. Enable OEM unlock on your device.
•Go to Settings > About device. And then tap on build no. 7 times or until your get the message ‘You’re now a developer’.
•Go back to Settings, scroll down, and tap on ‘Developer options’.
•Look for ‘Enable OEM unlock’ and use its toggle to enable it. Accept the warning by tapping on OK button.
Step 6. Boot Galaxy Note 5 into download mode:
•Power off your Galaxy Note 5. Wait 6-7 seconds after screen goes off.
•Press and hold the three buttons •Power + Home + Volume down together until you see warning screen.
•Press Volume Up to continue to download mode.
Step 7. Double click on extract file of Odin, Odin3 v3.10.6.exe, to open the Odin window, as shown below. Be careful with Odin, and do just as said to prevent problems.
Step 8. Connect your Galaxy Note 5 to PC now using USB cable. Odin should recognize your Galaxy Note 5. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue. Look at the pic below.
•You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.
•If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with the device. Mostly, drivers are the problem (look at step 2 above).
•You can try different USB ports on your PC too, btw.
Step 9. Load the TWRP file into Odin. For this, click the AP button on Odin and the select the file: TWRP-2.8.7.1-Alpha_N920T.tar.md5.
Step 10. Make sure Re-partition checkbox is NOT selected, under the Options tab. Don’t use PIT tab either. Go back to Log tab btw, it will show the progress when you hit start button in next step.
p 11. Click the Start button on Odin now to start flashing the firmware on your Galaxy Note 5. Wait till installation is finished, after which your Galaxy Note 5 will reboot automatically. You’ll getPASS message as show below upon successful installation from Odin.
•If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device, close Odin, boot device into download mode again, open Odin, and then select the firmware and flash it again as said above.
•If you get FAIL in the top left box, then also you need to flash the firmware again as stated …
That’s it. Enjoy the TWRP recovery v2.8.7.1 on your Galaxy Note 5.
PLZ Use the comment box below to contribute more ideas & Suggestions .
Don’t Forget To Share This post With Your Friends & your Social World.
Best regards.
Comments
Post a Comment